if it is anything like my 2006 Hyundai accent then you have take take off the black trim around the stero.. there are about 6 places where you need to pry. the corners and the middle areas. kind of tough to get off but just keep pulling. you wont break anything. just pull hard. after that is off all you have to do is unscrew the srews
Hyundai dealer or service station should stock this
screwdriver, and then pull hard enough to rip out the wires and then there you have it. the way to remove a stock stereo the theft version
Remove the decorative cover to your 2001 Chevy Lumina stereo. Remove the stereo retaining screws. Slide the stereo out and remove the wiring harness. Remove the antenna cable.
4*4 1/4
you need a dash kit. go to your local stereo shop and they should stock the hyundia kit. any single din size stereo will fit.
send this question next week I will be replacing the stock stereo this weekend if weather permits
Remove Stock Ford RadioCheck related link below
Open your glove box, on the right side (inside) on the glove box door there should be a # diagram with your code.
i currently have the same prob...to my understanging the stock stereo runs along with the dash lighting, so did you remove the stock stereo? also check fuses on the driver kick panel
You have to unscrew the center console and work your way up.
To remove the stock stereo from a 2000 Mazda MX-5 Miata, first disconnect the negative battery cable to ensure safety. Next, gently pry off the plastic trim surrounding the stereo using a trim removal tool, then unscrew the screws securing the stereo in place. Carefully slide the stereo out and disconnect the wiring harness and antenna. Reverse the process for installation of a new stereo.
http://www.installdr.com/InstallDocs/Honda/PDF/466053.pdf