By using glass cleaner
If your car is fitted with this feature ('Exclusive' models), then you rotate the mirror adjustment dial to the down position. Turning the dial back up will unfold them. Do not attempt this if you do not have the Exclusive version, or if your mirror adjustment panel does not have a white triangle in the 'down' position. Forcing the dial to turn down can break the connections inside, and you will have to replace the adjuster.
a reflection
Start from the inside. Insert plastic tool between A pillar and triangle plastic that covers it and separate. This will make all screws visible and accessible (3 in total)
switch wiring or mirror it's self probly switch
On the inside of the car there is a plastice cover shaped like a triangle, pry that piece off and you will see three screws.
You have to remove the door panel to disconnect wires (power mirrors). After that you have to remove the triangle panel which covers mirror nuts. After you removed the nuts carefully pull the mirror away. It's attached with a sticky tape, you might have to use some extra force. When you are done separating the mirror you can disconnect the cable and remove the mirror by pulling it away.
I don't know about the 2003, but I recently bought a 2006. When the power mirror adjustment button is selected to make the driver's side mirror active - that is, to adjust that mirror - the passenger's side mirror will rotate down when you shift into reverse. If the adjustment button is selected to the passenger's side, the mirror will remain stationary when you shift into reverse.
How do I disassemble the inside mirror adjustment
You would need to remove the door panel and also the triangle trim piece that covers the mirror bolts. An instructional video has been included below that will walk you through a step by step process on how this is done. Hope this helps, 1ATony
The door mirror unit on an Audi A3 is removed by the inner cover and taking out the retaining screws. The mirror can then be pulled away, the adjustment cable disconnected, and the mirror removed.
on top of door panel behind the mirror. remove the plastic cover by prying it off. remove the mirror nuts, and then remove mirror. if it has mirror adjustment cables on it. just remove these cables, and put on with new mirror if needed.
Look in a mirror for an example of a reflection. Lift your right hand, and watch your left hand lift in the mirror, or so it appears!In geometry, reflection is a mirror image of a shape, etc.For example: the triangle b is the reflection of triangle a.▲ a▼ b