in the trunk were the spar tire is
in the trunk.. upper right side...
Can be reached from the trunk
Unlatch the latches at the top of the window, then press the convertible top button down. this button is located near the armrest. If this does not work you must aquire a new convertible top motor. from the trunk, remove hyd. fluid from the conv. top pump, operate top by hand. worked for me for years
It wasn't a standard feature but if you have one it's on the floor to the front left of the drivers seat.
possibly the up solonoid located in the trunk attached to the convertable top motor.
To remove a Boxster convertible top from a vehicle, there are several screws that have to be removed at the point where the top meets the trunk. The bots must also be removed from the hinges on the sides.
It is between the rear seat back and the trunk. You have to remove the rear seat to access.
On the inside of your trunk lid locate the lockcylinder. There is a thin metal retainer which holds the cylinder in place, it has a small tab sticking out. Pull the retainer out and the cylinder will slide out .
The reservoir is part of the pump assembly and it is best accessed by removing the back seat and panel cover.Ê It is difficult to access thru the trunk so I don't recommend that.
There is no trunk access through the seat on a Chrysler Sebring convertible.
From inside the trunk.