Want this question answered?
The 1994 Dodge Intrepid O2 sensor is located on the outside of the air cleaner housing. The sensor is on the back side of the housing.
Unlike other cars, the Intrepid requires you to remove the entire headlight housing. This is very simple, there are to long bolts on top of the housing that hold the housing on. Simply remove these bolts, untwist the bulb, replace the bulb.
Follow the top radiator hose to the engine. It goes to the thermostat housing. Remove the 2 bolts in the housing and the thermostat is right below it.
how do you remove the flasher relay in a 2000 dodge intrepid. I got it unplugged but don't know how to remove it
The thermostat on a 2.7L Dodge Intrepid is under the housing where the lower radiator hose attaches to the engine.
no no
The 2004 Dodge Intrepid oxygen sensor can be found on the back of the air cleaner housing. Remove the wiring harness. Remove the oxygen sensor retaining screws. Reverse the process to install the new oxygen sensor.
It is not where the housing is. You have to lift car and its behind alternater.. not easy but possible
Under the housing where the lower radiator hose hooks to the engine.
On the passenger side bell housing on the near the transmission.
unde the housing where the upper radiotor hose hooks to the engine
top of the engine, under the housing the upper radiator hose hooks to.