Want this question answered?
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
you have to remove the fender
Your local auto parts store will sell you an inexpensive tool for under $10 to remove the clip from behind the handle to release handle from door.
It is important to know the different weights of a car. The weight of a 1968 Cougar vehicle is 3157 pounds.
For a 1968 Cougar with a 302 ci/ 2 bbl carb, you will want to set the timing at 6*B from TDC
Five. in a pentagon shape.
http://www.cougarpartscatalog.com/1919mecovaac.html
The Outsider - 1968 Handle with Care 1-21 was released on: USA: 5 March 1969
There is a screw located in the side of the door above where the locking component is and there is another one under the middle cover in the handle This holds the whole handle assembly in place. Remove these screws (it should be a large Philips head and a small one at the front part) and try removing the handle. removal of the door panel is not necessary no rods connect it to the inner handle and stuff.
The Mod Squad - 1968 A Seat by the Window 1-26 was released on: USA: 15 April 1969
One Life to Live - 1968 How to Handle a Woman 1-10486 was released on: USA: 23 July 2009
After removing the arm rest, door handle, and window crank carefully remove the trim panel. You will see that the window glass is moved up and down by the regulator that is operated by the window crank. The glass runs up and down in two channels, one in the forward and one at the rear. There are at least three adjustment that can be made by loosening the adjustment screws. The adjustments are made using an Allen key after loosening the outer retaining nut. The adjustments allow you to move the channels fore and aft as well as sidways. Most "how to fix your '68 Mustnag" manuals show these adjustments. Good Luck. pnl