What kind of engine is it? I know that Chilton's and Haines manuals have the procedure. You should be able to find them at Amazon or Ebay.
remove cover, unscrew, disconnect
The PVC valve for a 1991 Skylark should be located on the top of the valve cover. It is a plug in type, twist and pull to remove.
The easiest way to bypass the antitheft module in your 1997 Buick Skylark is to remove the fuse. The location of the antitheft module fuse is listed on the inside cover of the fuse box.
Wiper arms on a 96 Buick Skylark can be adjusted. This can be done by flipping open the plastic snap cover at the bottom of the wiper arm. Loosen the ratchet and remove the nut. Then adjust the wiper arm. Put back the nut and tighten the ratchet.Ê
Most of the fuses in the 1995. The Buick Skylark have a rating of either 20 amps or 30 amps. The fuse ratings, can be found on the fuse box cover.
There's a big, black plastic cover over the blower motor under the hood under the firewall. It's just behind the alternator.
There's a round cover on the bottom of the engine oil pan, you need a special tool to remove it, it's inside that hole.
It's near the back bumper cover, right behind the gas tank.
Remove the plastic cover over the drivers side headlights, then remove the headlight assembly(driver side only). The horn is directly underneath it - fairly easy to access, remove, replace, whatever you need to do. I replaced mine in no time.
Under the engine cover is the coil pack housing. Remove the engine cover to reveal the coil housing; this unit attaches to your spark plugs through the spark plug boots and retainers. Inside the housing are your two coils.
Driver's side valve cover top, locate 3/4" hose its on the end that is inserted into the valve cover.
Yes, it's gray and it's on the upper part of the firewall near the alternator.