Not an answerable question, what make model year and engine auto?
2004 Chevy Cavalier windshield washer fluid reservoir retaining bolts. Remove the windshield washer fluid supply tube. The windshield washer fluid reservoir will come free.
I believe you have to remove the battery, battery tray and then the washer fluid reservoir, now you can remove the pump from the reservoir.
Remove the reservoir bolts and nut. Disconnect the motor electrical connector. Detatch the fluid hose from the reservoir Take the reservoir out.
You have to remove the washer fluid reservoir and remove the pump from the bottom area of its side.
Its under the washer fluid reservoir. Have fun with this one! You have to remove the support bar, the washer fluid reservoir, and move the air filter housing to get the battery out. Enjoy!AnswerIts under the washer fluid reservoir. Have fun with this one! You have to remove the support bar, the washer fluid reservoir, and move the air filter housing to get the battery out. Enjoy!
Do not operate the washer. Remove the washer fluid reservoir and flush it with soap and water until all traces of antifreeze is gone.
Remove the coolant reservoir, flush it out, reinstall it and refill with proper coolant.
I have a Mits Galant 1990 A/T and recently repaired a leaking washer pump. The washer pump in my Galant is attached to the lower part of the water reservoir. You need to remove the electrical connection to the pump and remove the reservoir. Afterwards, you can remove the washer pump and replace it with a new one. To ensure you have no leaks when you install the new pump, I suggest you line the holw of the reservoir (the hole where the pump goes into reservoir) with silicone paste or any other sealant. Replace the reservoir and the connect the electrical connection.
first you have to remove the reservoir for the windshield washer fluid then you should be able to get at it. its right underneath that reservoir. atleast that is where it is on mine
To remove the windshield washer reservoir on a 1995 Oldsmobile 88, first, disconnect the negative battery cable to avoid any electrical issues. Then, remove any bolts or screws securing the reservoir to the vehicle, typically found at the top or side. Disconnect the washer fluid hoses and electrical connectors from the reservoir carefully. Finally, lift the reservoir out of its mounting position and set it aside for replacement or repair.
Remove the washer reservoir. The pump is located in the bottom. On some cars, the pump is permanently attached to the reservoir, so the whole reservoir will have to be changed, or buy an aftermarket pump, and modify the washer system.
To remove the windshield washer reservoir on a 2003 Chevy Cavalier, first ensure the vehicle is turned off and the keys are removed. Disconnect the negative battery cable to avoid any electrical issues. Then, remove the bolts or screws securing the reservoir to the vehicle frame and disconnect the washer fluid hose and electrical connector. Finally, lift the reservoir out of its mounting position.