i drilled a small hole in the bottom of mine theres no where for the water to go otherwise
Remove Front Grille. Remove Electrical Connectors. Remove Bolts (3 ea). Pull out Headlight Assembly.
Begin by removing the wiring harness from the back of your 1997 Pontiac Bonneville headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight.
Are you entirely sure there _is_ a headlight cover?
You need to remove the grill and then the headlight assemblies. I had to remove the battery as well to get at the last bolt for the headlight assembly. There are about 6 bolts and 4 preasure clips holding the grill on.
ask a engineer
Open the hood. Locate the access ports on the headlight cover panel. Open the ports by prying the ports open. Remove the bulbs/connectors from headlight and turn signals and marker light. There are now 3 locking c clips that go around the mounting and ajustment posts. Pull up on these with pliers. Remove the assembly.
After you take the headlight out, remove the metal clips holding the lens on. The lens has to be pried off because there is silicone there to keep it together
Before replacing the headlight bulbs on a 1997 Acura CL prop the hood open. Locate the headlight housing and remove the old bulbs. Install the new lights.
There are 2 horns on the 1997 Oldsmobile Silhouette. You must remove the headlight/ turn signal assemblies (2 thumbsrews to remove each one). You will find each horn in the space below the headlight.
12 volts...max 13.8 volts
In a 1997 Lincoln Continental : To the right of your headlight switch in the dash is a ( panel dim ) switch I believe if that is turned all the way up then the interior lights will come on
i dont know but it seems kinda hard