Drain the water from the cooling system. Remove the water hose from the water pump. Remove the belt from the water pump. Remove the water pump retaining bolts.
Drain the water from your 1987 Nissan Stanza. Remove the water return hose from the water pump. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
Remove the belt from your 1987 Chevy Nova water pump. Remove the water pump return hose. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
Remove the rad. cover, belt, fan, and there's the water pump.
DRAIN AND REMOVE RADIATOR.SHROUD AND FAN REMOVE WATER PUMP,RE-INSTALL PUMP WITH SILICONE SEALENT..GOOD LUCK ..toro2
The timing belt has to be removed to access the water pump. Once the pump is replaced the timing belt has to be replaced and set.
go to fordforums.com.au there are detailed instructions on how to do it. ramrod
Drain the water from the cooling system. Remove the water hose from the water pump. Remove the water pump retaining bolts. Remove the water pump. Reverse the process to install the new water pump.
Drain the radiator. Remove the water pump belt. Take off the fan shroud, then the unbolt the fan. Unbolt the water pump and remove. use new gaskets and gasket sealer to install the new pump.
Yes they have one!
To replace the water pump on a Ford Laser KC, first, disconnect the negative battery terminal and drain the coolant from the radiator. Remove the drive belt, then take off the timing belt cover to access the water pump. Unbolt the old water pump, clean the mounting surface, and install the new pump with a new gasket. Reassemble the components in reverse order, refill the coolant, and check for leaks.
You will need to drain the water from your cooling system. Remove the water pump belt. Remove the water pump retaining bolts. The water pump will come off.
To remove the water pump from a 1987 Chevy Celebrity: 1. Using a suitable container drain the coolant to a point below the water pump. 2. Release the tension on the serpentine belt. Remove the belt from the water pump pulley and position the belt away from the water pump. 3. Using a proper puller remove the pulley from the water pump. 4. Remove the bolts from the water pump. The water pump should pull off at this point To reinstall a new pump: 1. Clean the old gasket off the water pump mount point. 2. Using a new gasket and any sealer desired bolt the new pump in place. 3. Using the install tool press the pulley on the new pump. 4. Put the serpentine belt back in place. 5. Refill with coolant. Check for leaks