answersLogoWhite
Cleaning
Painting and Staining
Wood Crafts

How do you remove yellow stains from varnished wood?


Top Answer
User Avatar
Wiki User
Answered 2012-10-30 23:47:57

You may have to sand them out and re-varnish.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


To get hairspray off of varnished wood, use a cotton ball and rubbing alcohol to clean the affected area. Then use a bit of soap and water on the wood, and allow the wood to dry.


There are various ways to remove rust stains from wood counter tops. The easiest way is using acids and a piece of cloth to remove rust stains.


Pledge will remove water stains from wood as well as apply a protective layer to help keep new stains from forming.


Sometimes wood needs to be re varnished or restrained. To remove old varnish, you can use either a paint stripper or sand off the old varnish.


A. - Put less glue on in future. B -paint it over with a 'high hide' primer like Kilz


They will need to be rubbed out. Talk to your local furniture store about how.


There are several different stains that would help stain the wood to a darker color to your preference. This website offers lots of wood tools and stains to help with your wood needs. Here is the website I researched: http://www.woodcraft.com/


Naptha and mineral spirits will remove polishes and waxes but not oil based stains or coatings.


Goof Off will remove many paints ,and if your cabinets have been varnished it will not hurt the varnish. -Try on a piece you can't normally see.


Stains on wood floors require sanding and refinishing.


There are a few ways one can remove wood stain off of concrete. One way is to use a sandblaster to remove the stains. Another method is using wood bleach, water, and a scrubbing brush.


Finished word (varnished, stained and waxed, etc.) should resist stains well if the wood finish is kept up. Unfinished wood is porous and subject to staining. Anything with color or pigmentation can be "transported" into the grains of the wood. Solvents push whatever it is deeper, and will cause that colorant to "wick up" to the surface as they dry out. Additionally, solvents spread the problem over a broader area in addition to drawing out things in the wood that give it its appearance and should be left in it. It is possible to sand out stains, and that is about the only way to completely remove a pen mark from wood. If you attempt to remove the ink with solvent of some sort before you sand, you've made your problem worse. But removing the wood is the only surefire fix here. What we generally think of as "hard woods" have a tighter grain, and will generally hold the ink closer to the surface. Your choices are limited, depending on the piece and how it is finished.


Wood stains and varnishes


Primers are good for protecting against stains, wood sealer is good for soft woods, and wood stains are good for different types of wood. Semitransparent stains are meant for bare wood and semisolid is meant for ones that have previously been stained.


There is always a possibility of getting splinters from a wood floor. You can reduce the probability by having the floor sanded and varnished.


Wood stains are used on wood that has been made into a piece of furniture, if you wish to preserve the 'wood' look. Many people do this and leave it as is, some prefer it covered with clear varnish.


you can use "oxalic acid' look for wood bleach in the paint dept or zud in the cleaning dept


To remove kitty litter stains and scratches from a wood floor, depending on the severity of the stain, a sander may be your best bet. Sand down the spot, and refinish it with the stain of your choice. When shopping for kitty litter, read the label and find the one best suited for use on wood floors.


Yes, wood can be stained then varnished or just varnished. Sand the wood and clean with white spirit, and allow to dry. This removes any dust or grease etc that will spoil the finish. Then first coat of varnish. Give a light sand or rub with steel wool between coats to build up a shine.


Taking a bath does next to nothing, as the stain penetrates further into your skin than you can comfortably exfoliate. Rub the stained area(s) with a piece of at least somewhat fresh poplar wood and not only will you have the stains removed, but your skin will be very smooth for days afterward.


To remove green mold from wood fill a bucket with household detergent, and warm water. Dip a cloth into the cleaning solution and use the cloth to clean the mold. Next sand down the area to remove deeper stains. Finally, varnish or clear coat the area.


To remove stains from your deck start by giving it a good washing. Sweep up all loose debris and dirt then give it a scrub with a mild detergent and water solution. Make sure not to use a harsh chemical that could warp the wood. It will take a good amount of scrubbing with a stiff bristled brush but most stains should easily come out.


Rubbing alcohol is good to remove certain stains from wood floors like nail polish. Rubbing alcohol can stain some wood finishes so a test should be done before using.


Woodstain is applied with a rag or brush and then varnished with clear varnish, or tinted varnish can be used, available in different timber colours.


Even wood stains on soft wood are pretty hard to get. You have to sand the wood a little more than you usually wood with a hard wood. You can view a step-by-step instructional by a renowned builder by visiting http://www.askthebuilder.com/497_Perfect_Wood_Stains_on_Soft_Wood.shtml.



Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.