Take it out and buy a new one. This is easier since you don't have to take the time to fix it.
To repair a broken door hinge on a 1991 Cherokee Briarwood, a new piece of metal should be welded in to hold the hinge. Then, a new hinge should also be welded in that is aligned with the door pin.
form_title=Sliding Door Repair form_header=11193 "Exactly, where is the damage on the door or frame?"*= [] Lockset [] Deadbolt [] Door glides [] Sliding door track [] Screen [] Door sticks [] Door frame [] Weather-stripping [] Cracked jamb [] Threshold damaged [] Cracked/broken glass [] Moisture between insulated glass panes [] Other [] Don't Know
There are several negative issues of removing a door frame. It can lead to mold-related problems, appearance issues due to painting, and very expensive to repair removed door frames.
Broken off the door or from main body? Main body- Prefabricate. Door- replace door.
First you take off the door panel screws in inside door pull then take plastic trim off of inside door handle pry between outside frame work plastic and that thin gap then pop the plastic clips that hold the door panel to frame( gasket scraper wrapped in tape) and then pry. Inside of door will be exposed to work on then GOOD LUCK
If the door latch on a 1999 Chevrolet Blazer is broken on the car frame, a new latch might have to be welded in. The old door latch will have to be cut out with a torch. If the latch is broken on the door, a new door might be cheaper than welding in a new latch.
Yes, there are several garage door repair places in Portland. One of them would be http://www.portland-garage-door-repair.com/.
You have to take the trim pad off and get inside the door.
It probably has a control rod that has had its plastic pivot broken. You will need to remove door panel.Good luck.
There should be a stop bolted onto the inside door frame. Look to see if it has broken or come loose.
Need more info. Are you trying to replace the clips that hold the door to the frame, or is the door delaminating. What kind of vehicle?
You remove it from the door and find exactly which part is broken,replace that part.