You will need to remove the cylinder head from your 1994 Chevy. Remove the head gasket and clean the surface. Put the new head gasket on and put the cylinder head back to its original position.
You do not repair a head gasket you replace it with a new gasket which requires removing the head.
The only repair is to replace the head gasket.
They only Head Gasket I had to replace was on a Chevy Malibu 1999. Cost me about $1400
you can find them on autozone.com, in the repair guides section,complete with pictures
It depends on if you have been driving it with a bad gasket. Most garages will have to send out the head to be tested to make sure it is not warped. I had a cracked head gasket but the head did not need to be machined. The repair cost me $750.
Yes, the exhaust manifold on a 99 Chevy S10 2.2 will need to be be removed during the blown head gasket repair.
The 1994 Buick Century 4 cylinder head gasket will have to be removed and replaced. The head has to be removed, along with anything that is physically in the way of removal, before the head gasket can be removed.
The only repair for a blown head gasket is to replace the gasket.
about 2000 if your lucky
Remove intake and exhaust manifold. Remove head and replace the gasket. This is a major repair best left to a professional.
You cannot repair a blown head gasket, you must remove the heads and replace the gasket.
It is not possible to repair the actual head gasket. Repair of a blown head gasket is to replace the gasket.