Job requires a rivet tool and right size rivets. remove the door trim panel. disconnect electrical connectors. support the window glass halfway up. remove rear channel guide. drill out the 4 regulator rivets with a quarter inch bit. disengage the regulator from the guide chanels. to INSTALL, place new regulator in the guide chanels. secure with new quarter inch pop rivets. plug in electrical connectors. replace rear channel and secure it tightly. replace door trim panel.
The 1994 Chevrolet Camaro power window relay switch can be found inside of the driver side door. You will need to remove the door panel to access the power window relay switch.
pry out the control switch and disconnect the electrical connectors.install is reverse.
The 2014 Chevrolet Camaro is 6 ft. 3.5 in. (75.5 in.)12V front power outlet(s) wide.
The 2013 Chevrolet Camaro is 6 ft. 3.5 in. (75.5 in.)12V front power outlet(s) wide.
The 2011 Chevrolet Camaro is 6 ft. 3.5 in. (75.5 in.)12V front power outlet(s) wide.
The 2010 Chevrolet Camaro is 6 ft. 3.5 in. (75.5 in.)12V front power outlet(s) wide.
The 2002 Chevrolet Camaro is 6 ft. 2.1 in. (74.1 in.)12V front power outlet(s) wide.
The 2012 Chevrolet Camaro is 6 ft. 3.5 in. (75.5 in.)12V front power outlet(s) wide.
You need to check the power and ground at the fuel tank. If that is okay the float is most likely bad.
Here's how to test and repair power windowshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
http://www.edmunds.com/used/1995/chevrolet/camaro/13066/specs.htmlHorsepower: 275 hp
See this post for instructions and photoshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator