Stick ur erection
just pull the ashtray all the way out and remove the screws on the sides.
It doesn't have a real ashtray. Dodge sells a ashtray insert for the cup holder instead.
Remove ashtray if equipped, push cup holder in slightly and hold down on the plastic lever at the rear left side of ashtray slot while pulling out the cup holder. Least that's how to remove it on a 1999 T&C Limited.
Remove original ashtray, remove 4 screws that hold ashtray mounting bracket. This will give access to the 2 screws that hold inner end of cup holder. The cup holder must be pulled all the way out to get to screws. Remove screws, remove 2 screws in front face, cup holder will come right out. Installed updated cup holder in 20 minutes, start to finish!
Pull out the ashtray and then the panel above and the cup holder . Radio will then come out
* Use a small screwdriver to lift it out then you are also able to remove the cup holder as well by inserting you finger behind the ashtray and pushing down on a small lever
You can find info on this at FordF150.net. Go to the Forum section, then search and type in "ashtray." Then look through forum. There is one there on the second page with photos. Look for post from Japacas under the heading "Ashi tray fix."
You have to break it and ha ha ha !
I would be almost shocked if anyone had ever tried to repair a water bottle cage, because they're inexpensive enough you can afford to just replace it.
It was made by James Guillow in 1943.
The cup holder may snap out depending on which one it is. If the cup holder is a flip out style from the center arm rest then in has small ears that hold it in.
How do you replace cup holder in a 2000 Lexus ES300