The PCV valve on any Kia with the 1.8 liter DOHC 4 cylinder(Sephia or Spectra) is located in the aluminum valve cover on top of the engine, on the passenger side and facing the firewall. There is a 3/8" i.d. neoprene hose about 5" long connecting the valve to the intake manifold, with a "squeeze type" hose clamp on each end of the hose. Simply squeeze the clamps with a pair of pliers and move them toward the center of the hose, then work the hose off the fitting on the intake manifold and PCV valve. The valve will probably pull out of the engine valve cover along with the hose. Place the new valve in the valve cover, then reattach the hose and move the clamps back to their original position with pliers. CAUTION: The old hose, if it hasn't been replaced before, will be hard and brittle, and may break. Just get a 6" piece of 3/8" neoprene fuel hose at your parts store, cut it to length, and install it on the PCV valve and manifold fitting with the old clamps. You're done!
my 1998 kia sephia will not crank over
removal 1998 kia sephia back seat
Yes the kia sephia has 2 brake proportioning valve located on the fire wall
in valve body
how to set your gears for timing belt on 1999 kia sephia
how to replace that
The taillights on a 1999 Kia Sephia are replaced through the cars trunk. Remove the plastic covers from the light housings and replace the bulbs.
If you look under the car, passenger's side, it should be right there up under the engine, or at least that is where it is on a 1998 KIA sephia.
4x100
were are the sprk plugs located on a 1998 kia Sophia
yes
whats the torque spec for the pressure plate on a 1998 kia sportage?