The diagram.
You won't need a diagram if you change one spark plug wire at a time.
underneath the plastic cover on the engine head are the spark plug wires, there are 2 coil packs there. the wires connect the coil packs. 2 of the spark plugs are under the coil packs and the other 2 are exposed...
Change the 2 coil packs and the 2 spark plug wires and for good measure the spark plugs as well.
Pull the spark plug wires off the spark plugs. Remove the spark plugs with a spark plug socket. Install the new spark plugs and put the spark plug wires back on. I recomend replacing the spark plug wires as well. If replacing them, just remember that the new wires are hooked up the same ways that the old ones came off.
where can you find a diagram to correct the wires from the distributor to the spark plugs on 95 ford e250?
Out of time or spark plug wires hooked up incorrectly.
have u checked spark plug wires, ignition coils, timing,spark plugs or had it hooked to a reader?
remove the plastic strip down the middle of the valve cover. you should fine wires and coils.
They are in the heads where the exhaust manifolds are bolted to the heads. The plugs have rubber wires hooked to the ends of them.
You don't need a diagram to find spark plugs on this engine. Follow the plug wires and you will find the plugs.
I need to know which is the right length of the spark plug wires are going in to the block?