0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Where is the fuel filter located on a nova?
Follow the fuel lines from the tank to the engine, and you will find it.
Where is the fuel filter on a 1986 Chevrolet Nova?
The fuel filter on a fuel injected car is on the frame on the driver's side just before the gas tank. If you have a carburated car it is in the inlet of the carburetor.
Where is the fuel filter on a 1976 Nova 305?
Inside of the front of the carburetor right where the fuel line goes in. Detach the fuel line and it will pop out.
What does a fuel filter for 1964 Chevy Nova look like?
It's in the carburetor, take the fuel line to the carb off and then the big nut on the carb and the fuel filter is behind the big nut.
Where is the fuel filter on a 1974 nova?
It's usually in the carb. Take off the fuel line and unscrew the big fitting.
Where is the fuel filter on a 1986 Chevy Nova?
It is in the inlet to the carburettor. Remove the fuel line at the carburettor and then the large nut (1 inch). Remove the filter and be careful not to lose the spring.
Where is the fuel filter located on a 1986 Chevy Nova?
the fuel filter is located on the drivers side close to the fire wall, its white an looks like a little canster with to lines on it.
Where is the fuel filter on 1977 nova?
It is in the inlet to the carburator. It will require a 5/8 inch wrench for the fuel line and a 1 inch wrench for the inlet fitting.
How do you change a fuel pump on an 88 Chevy Nova?
The fuel pump is mounted on top and inside the fuel tank. You must remove the fuel tank in order to access and replace the fuel pump.
What makes your 1964 nova engine die then come back on?
The fuel filter may be plugged up, the one inside the carburetor.
How do you replace dash lights on a 1967 Chevy Nova?
You have to get up under the dash, and they go in with twist in sockets, to the back. I think their number is 194.
Where is the fuel filter located on a 1978 Chevrolet Nova?
Remove the fuel line from the carburetor using a 5/8 and a 1 inch wrench. With the 1 inch wrench remove the fitting from the carburetor. Install the new filter with the spring first.jd
