To make it easier it might be better to remove the Breather Seperator first then unscrew the pcv valve from the breather seperator in hand. The pcv valve is located underneath and you can acces it by removing the oil filter and the oil filter base (4 nuts).I am having trouble finding a mechanic who can change this pcv part. They all want to charge 275.00 labor for a 8 dollar part!
== Answer The PCV valve on a 1993 Nissan Altima is located under the intake manifold just above the oil filter. You have easier access if the oil filter is removed. Not so easy...
Nissan Altima was created in 1993.
I have the same problem on my Nissan Altima, it is the antenna motor. Replace it.
1994 it replaced the Nissan stanzaAnswer1993 is the correct answer. It did replace the stanza, but in 1993.
I need to replace the rack and pinion in a 1993 Nissan Altima.
Why is your 1993 Altima Nissan making a clicking noise but does not start?
AnswerIt doesn't have a PCV valve.Actually it does. The PCV valve for a 1993 Nissan Altima is located behind the engine below the intake. Buy a Haynes manual, the PCV is VERY tough to get too but it can be done. You can only get two bolts from the top but have to go from underneath the car to detach the hose.
The oil capacity on a 1993 Nissan Altima is approximately 4.1 quarts. The oil that should be used is 5W-30.
Yes it does
How to replace a fuel pump on a 1993 Nissan altima?" Remove the back seat. The fuel pump is located under the seat. Will either unbolt or have a locking ring, remove whichever the case may be. Lift fuel pump out of tank, install new one with new gasket.
The Nissan Altima was introduced in 1993 as a replacement for the Nissan Bluebird. Originally, it was named the "Stanza Altima," before the model name was shortened to its current form.
its in the intake manifold