Want this question answered?
Follow the link below, labeled "How to replace a Lexus IS300 tail light"
you dont you get a new car
Lexus IS300 3rd brake light is changed from the back seat. Pry the light up and disconnect wiring. Replace bulb and put back together. Easy job
remove bulb from in side the boot
y
The brake light assembly can be access through the cargo compartment. Remove the cover to the brake light assembly. Take hold of the brake light connector, push in and turn at the same time. The brake light will come out. Reverse the process to install the new brake light.
You can access the brake light bald through the trunk compartment. Remove the trunk liner from the tail light assembly. Push the brake light connector in and turn at the same time. The brake lightbulb will come out. Reverse the process to install the new brake light
The center brake light bulbs can be replaced by lifting up on the rear light assembly and pulling towards the front of the car. www.lextechautomotivellc.com
If you grab the light and pull it straight twards yourself it will come off. The bulb is in there
The 3rd brake light can be replaced by removing the subwoofer cover by pushing down and towards the front of the car, other brake lights can be replaced by opening velcro covers on inside of trunk lid.
http://bananags.grantham-international.com/GS_DIY/change_brakelight/ This has many cool mods if you are into that. I did the brake light mod where the top and bottom taillights come on when you brake. Looks cool.!
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.