Which one please. Left side, right side, or the 3rd light on the glass hatch?
If it is one of the side pillar lights - open the rear glass hatch. This will reveal the screws that hold the tail light housing and lens to the rear pillar. Remove the screws and carefully lift the tail light housing away from the pillar. You will see the socket inserted into the back of the housing. Slightly turn the socket to loosen the weather-tight gasket and pull the socket straight out revealing the bulb. Replace with the proper bulb. Re-assembly is the reverse of removal.
how can i replace a brakelight bulb on a 2002 nissan frontier?
where are the bolts?
Brake Light Switch as per Snap on Diagnosis
The light assy has to be removed to take the bulbs out.
Normally it means the brake master cylinder is low of fluid. But it can indicate another problem.
remove bulb from in side the boot
It means the light bulb(s) on the rear break lights have gone out and your rear break lights do not come on when you depress the brake pedal. Just replace both rear break lights and the sensor will go off. This happened on my 2002 Honda Accord.
how do you replace brake-pads on vw beetle 2002?
Assuming you mean brake lights, the brake light switch is broken or out of adjustment.
Take out the two screws and replace one or both of the lamps.
Its a whole led unit replace whole deal not bulb
1989-2002 Isuzu Rodeo and/or Honda Passport brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb lamp replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).