jack the car up. remove the lug nuts on the wheel and remove the wheel. remove the bolts on the back of the caliper. remove the brake line and have something to catch the brake fluid that's going to pour/drip out. the caliper should pop off of the rotor after that. on the rear you will need to remove the ebrake line.
Wat are the tps volt settings for a 1992 Nissan 240sx
on the dampener pulley
Yup, the bell housings are exactly the same.
My 1992 Nissan 240 sx is 038
Yes, some '92 240sx' came with the ka24de motor.
1-3-4-2
the 95 has KA24DE engine; yours is the same. you should be able to use them near interchangeably.
yes, all it is is an sr.
dexron 2 fluids
NO, bellhousings are different.
You will need to remove the tire and wheel from your 1992 Nissan Stanza. Remove the brake pad spring and caliper. The brake assembly will come off. Reverse the process to install the new brake pads.
Begin by removing the wiring harness from your 1992 Nissan antenna. Remove the antenna retaining nuts. Reverse the process to install your new antenna.