Replace belt self tensioner, if applicable. Adjust belt tension. Replace belt. Have ac pressures checked. AC compressor may be failing.
remove compressor put a bypass pulley in its place replace belt
replace the a/c compressor by a pulley kit
BeltsYes, you must remove all of the belts to replace the alternator belt. The compressor belt first, then the power steering belt then the alternator belt.
how do you replace a/c compressor for 1996 honda civic 1.6L
Remove the freon from the system. Disconnect the compressor belt, then remove the lines. Unbolt the compressor and remove it. Install the new compressor, connect the lines and belt. Pull a system vacuum, then fill with new freon.
The belt on a Hyundai Accent which must be loosened to replace the AC belt is located around the air conditioning compressor. It can be found at the front of the engine, near the bottom.
You remove the compressor and replace the belt with one for a truck with out ac
To replace the AC compressor in a 1999 Grand Prix you must first remove the AC belt. Then disconnect the negative battery cable before removing the compressor bolts and connectors and removing compressor.
Remove the Freon from the compressor. Remove the air conditioning hoses. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install the new air conditioner compressor.
I had a 1995 buick lesabre and the A/C compressor went out in the winter time. I waited until spring to replace the compressor. In the mean time, I used a Dayco 72.10 inch belt and bypassed the A/C compressor and it runs fine.
Remove all A/C lines from the compressor which will cause you to lose you're R-12, release belt tensioner from the A/C compressor and remove the compressor from the engine bay and replace it with a new one. Installation is just reverse of removal