Want this question answered?
500
Don't bother trying to replace a torn boot on a half shaft. It is quicker, easier and cheaper to replace the whole half shaft.
Generally, to replace spark plugs on a Subaru vehicle, the spark plug boot should be removed. Then, the old spark plugs should be removed using a socket wrench, and replaced with new ones.
remove bulb from in side the boot
Lift the vehicle using a jack. Inspect the CV boot for problems. Mark the axle. Separate the CV from the shaft. Remove the CV boot clamps. Use a mallet to knock the CV joint off the shaft. Remove the boot from the CV axle shaft.
yes
remove the console, you should see some screws on the bottom of the boot, remove, replace boot, replace console
A CV boot is found on the axle of a vehicle. To replace the outer boot remove the axle bolt and pull the boot off. The inner boot requires removal of the whole axle.
you cannot just change the boot you will have to replace the whole axle
Celebrity Boot Camp - 2002 TV was released on: USA: 30 September 2002
Consider replacing the axle with a rebuilt unit. When the boot is torn, contaminants enter the joint and quickly destroy it. It is very labor intensive to replace the boot vs an axle which is a do-it-yourself job. In my shop we used to replace boots but because of high incident of joint failure customers were understandably upset. The boot has a life and so does the joint; once the boot tears ,the joint is not far behind. Why do the job twice?
you go.... and replace it!