Take it to the dealer, this is not an easy job.
Take it to the dealer, this is not an easy job.
I did replace the outside door handle on my 1999 suburban drivers door. It is not a easy job and was very frustrating. Remove the inside door panel. The door handle is held on by two screws. There are also two rods to deal with. one for the lock the other for opening the door. Do not get them mixed up. I was able to get the new handle in with the door lock only partially in the new handle. Then with the new handle screwed in I was able to push the lock all the way into place. Test and replace door panel.
take it out
W/ a new one
how to replace a exterior front door handle on a 1999 toyota tacoma
Door handle to what?
Should have access after removing inner door panels
Here are directions for a camary. It is basically the same for the avalon.http://autorepair.about.com/library/weekly/aa092504b.htm
unscrew the inside door panel then unbolt old handle install new one . i recommend you spend a few more dollars and get the good handle it is worth it
You remove it and replace it...
Its on youtube
Need to know if it is an inside or outside door handle.
on a 96 chevey Tahoe you take the panel off the inside it allows acess to the bolts holding it on
= How do you replace the driver's side Inside door handle on a 2004 Toyota Camry? =