Check your owners manual, directions are there. If not, 3 screws, one has temp sensor on it, be careful with the lower outside one, drops easily and is hard to find. Also one pop-out plastic rivet. When the screw are out, take a plastic pry bar on the outside of the assembly as they are still held in by a plastic V and plastic pin. Give the bar a smart pry rearward (moving the assembly forward), and out it will come. Signal bulb is the outboard bulb. To disconnect the bulb from the assembly will be self explanatory when you look at it. Check your good before reinstall. Position the assembly with the V over the pin, pop it back in, replace the screws and rivet (don't forget the temp sensor) and your done. It's a real pain, as the headlight is the same, and IMHO the bulbs should be replaceable a lot easier in case you need to do it at night away from your tools and home. Good luck.
To replace the turn signal switch of a 1996 Dodge Caravan, open the engine's hood to access the front turn signal bulbs. Then take the headlight assembly a little off the front to give room to get the bulbs. Remove the old turn signal switch and slip the new one in place.
You need to remove the head lap it has some scews on the side and on front.
Front drivers sideFront drivers side
Under, on the drivers side front of engine. Not an easy one to replace.
pain in the butt. i think you can do pass side without removing assy. but drivers side is removing housing to get at bulbs its not that bad to do make sure you try to remove what is blocking acess first.
trouble putting right front signal bulb in.
How do you replace a front turn signal bulb for a 2000 sts cadillac?"
How do you replace the front turn signal bulb located on a 2001 Buick Century?"
how do i change driver side turn signal bulb on 1992 dodge caravan?
how do you take out the front signal lamp on a 2004 range rover
how do you replace front left turn signal on a 2001, volvo, s80
on what car