Open tailgate(s). Look for two plastic caps that cover the screws holding the tail light assm in place. Pry out plastic caps with a flat blade screwdriver and remove the screws you see inside, I think they are Phillips. Remove assm from car, disconnect wiring by turning and pulling. Replace lamps, reassemble in reverse being careful NOT to drop the screws into the taillight assm. Best to tape screws to screwdriver while reassembling to keep screws in place.
Depending on what you mean ,to change a bulb on the 2000 you need to open the rear door on the side of the light you will see two screws take those out and the light will come out.
behind the brake pedal
How do you replace the rear brake light bulb on a 2001 Honda civic?"
How do you replace the third rear brake light in a 2005 buick allure
3rd brake light or rear brake lights?
Left the rear hatch and remove the headliner trim and headliner ( Partially). Unplug the brake light wire that leads to the light housing. Loosen 2 screws below the light and remove carefully.
Your brake light is probably brake fluid low or emergency brake on. Rear brake lights are replaced by removing the lens and replacing the dual filament bulb.
Just unscrew the rear brake light, turn out the socket, and replace the bulb.
How do you replace rear window brake light bulb in the 2004 Hyundai Santa Fe?Read more: How_do_you_replace_rear_window_brake_light_bulb_on_2004_Hyundai_Santa_f_e
The center brake light bulbs can be replaced by lifting up on the rear light assembly and pulling towards the front of the car. www.lextechautomotivellc.com
To replace the rear corner lights on a 1998 Acura CL open the trunk. Find the brake light housing and disconnect the bulb. Install the new bulb.
Answer Time is moneyopen the rear tailgate doors. In the fram you should see 2 plastic black plugs.Remove the plugs and Phillips screws under them,this will allow tail light housing to be removed. Unscrew 5/16 bolts on housing to expose bulbs.