0
How do you replace a rear wheel bearing on a 2000 Chrysler neon?
Wiki User
∙ 15y ago
It's simpler then it looks. Remove the wheel then the brake drum, with a flat head screw driver remove the dust cover. you will need a large socket to remove the nut. I bought one at Auto Zone I beliieve it was a 36MM but the package says earley Chrysler Front hub nut socket (same nut for the rear) after removing the nut the hub and bearing asy will slide off. When putting on the new hub make sure you grease it with bearing grease
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you change a rear wheel bearing on a 2000 Pontiac Montana?
You need to replace the rear wheel hub - bearing and speed sensor inclusive
How do you replace front wheel bearing on 2000 Mazda Protege?
you need to press out the bearing inside the hub assembly.
How do you replace front wheel hub bearing assembly on 2000 dodge Dakota quid cab?
how do i find out if i have ABS on my front wheel bearing , on my 2000 dodge Dakota quad cab 2 wheel drive
How do you Replace front wheel studs on 2000 Montana?
You replace the wheel bearing hub assembly - it has studs, bearings and wheel speed sensor around $100 part
How do you replace front wheel bearing on 2000 VW Cabrio?
you take it to a place that does that kind of stuff.
How do you replace a front wheel bearing on a 2000 Saturn SL1?
You need to have a wheel press. Other than that it's self explanitory.
How much money will it cost to replace a front wheel bearing on a 2000 Ford Explorer Eddie Bauer 4x4?
It will cost approximately $150 to change the front wheel bearing on your 2000 Ford Explorer. The wheel bearing will cost approximately $30 and require two hours of labor to install.
How do you replace the front wheel bearings on a 2000 mistubishi montero sport and how much time is involved?
Begin by removing the tire and wheel from your 2000 Mitsubishi. Remove the end of the axle. Remove the wheel bearing nuts. Remove the axle seal and the wheel bearing. Reverse the process to install your new wheel bearing. It will take a novice mechanic approximately 2 hours to complete the job.
How do you replace a wheel bearing in a 2000 Dodge Intrepid?
Remove the caliper.Remover the brake rotor.Tap the axle free from the rotor.Then unbolt the bearing assembly from the backside of the bracket.
How much does it cost to replace bearings on a 2000 Hyundai accent?
Most likely you are looking at about $280 per wheel bearing
What is the general cost to replace a bad wheel bearing on a 2000 dodge grand caravan?
approx. $50 on each for DIY
How do you change front wheel bearing on a 2000 Chrysler 300?
Remove wheel then remove the big nut that holds the axle to the hub. Remove the brake caliper and rotor, through the hole in the face of the hub(where the wheel studs are) remove bolts that hold the hub and bearing to the steering knuckle. Tap hub and bearing assy from knuckle. The hub and bearing is one part.
