answersLogoWhite

0


Best Answer

You can borrow a serp. belt tool from autozone, but you can also get by with a 15mm wrench. (use the open end--closed end wrench won't fit.) Just turn the bolt on the tension pulley to the right as you are pushing down & the whole pulley will move down & release the tension. (The tension pulley is the smooth surfaced pulley located to the left & down from the alternator & up & left of the water pump) To put it back on, have the belt in place on the other pulleys & take up any slack. Then do the same thing as above & slide the belt back over the tension pulley. If you have someone there to help you, you can also put the belt around all the pulleys except the one on the alternator and have your helper slip the belt over the alt. pulley as you are taking the tension off. Oh, and before you start, be sure to make a diagram of how the belt goes around the pulleys.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace a serpentine belt in a 1996 Pontiac Sunfire SE 2.2L Do you need a special tension wrench or is there another way to take it off?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the serpentine belt in 1997 grand am?

How do you replace the serpentine belt in 1997 sunfire


When should the vapor canister be replace on a Pontiac sunfire?

when should the vapor canister be replace on a 1996 pontiac sunfire


How to replace speedometer cable on Pontiac Sunfire 1999?

There is no speedo cable on a Sunfire.


How do you replace the water pump on a 1999 Pontiac Sunfire?

Pay a mechanic to replace it


How do you removed a tie rod inner for a Pontiac Sunfire?

how do you repair an inner tie rod for a 96 Pontiac sunfire no repair,replace with new.


How do you remove a belt tensioner for a 1997 Pontiac sunfire?

Remove the serpentine belt. Tensioner is below Alternator. Remove the three mounting bolts on the tensioner baracket assembly. Replace entire unit.


How do you replace a timing chain on a 2002 Pontiac Sunfire?

You can replace a timing chain on a 2002 Pontiac Sunfire by visiting a local mechanic and having him take care of it for you. This is a tricky part to change yourself.


How much labor to replace a clutch on a 1996 Pontiac sunfire?

The labor to replace a clutch on a 1996 Pontiac Sunfire can range from $670 to $850, depending on where you go. This does not include the cost of the clutch itself, which is roughly $800.


How do you change rear wheelbearings on Pontiac Sunfire?

OK ... Here's the REAL answer: You cannot change the bearings on a Pontiac Sunfire. You must replace the "Hub-Assembly" they will be the same on both sides .


How do you replace a missing 2000 Pontiac sunfire key?

How is the ignition key switch replaced on the 2000 Pontiac Sunfire? And after replacing the switch would I have to have it Towed to the Pontiac Dealer in order to have the car key programed to the Computer?


Do you have to remove the fuel tank to replace the fuel pump on a 2002 Pontiac sunfire?

yes


How do you replace the ac clutch on a 2000 Pontiac sunfire 2-2L?

Buy a Manual. ;)