0
What else can I help you with?
How much to replace a head gasket on a 1995 Honda civic dx?
ABOUT $1200
How do you fix overheating in 1995 ES300 Lexus?
Replace the head gasket. Yep.
What will fix a blown head gasket in a 1995 Chevy cavalier?
Remove the head and replace the gasket. No other way to fix it.
How do you replace the head gasket located on a 1995 Ford Fiesta SI?
take it to your local garage
You need step be step instructions to replace the head gasket in a 1995 Hyundai Sonata?
buy a manual
Where is the cylinder head temperature sensor located on a 2000 F250 Triton 5.4L?
Where is cylinder temp sensor on 2000 Ford f250 with v10 engine
Did camaros have a steering dampner?
I have a 1995 Z28 and a lift.... I didn't see a dampener (shock absorber like)on the steering unit, unless it is completely covered by the metal bulk head support underneath it. If it had one, I would like to replace it b/c it feels like it needs it, but I guess it could be a control arm bushing or a tie rod end etc. -Zeb
How do you adjust the steering gear in your 1965 F250?
Down on the steering box itself right on top you will see a nut about 3/4" with what looks like a slotted screw head in the middle of it, just crack the nut loose and tighten down the screw until your steering free play diminishes. Then retighten the nut while holding the slotted screw part from turning as you retighten the nut.
How do you replace a head gasket on a 1995 altima?
Intake & exhaust manifold must be removed. Then the head must be removed. head inspected for cracks or warping, and new head gasket installed. Not a repair for a novice.
How do you remove power steering hose?
I need to know how to replace the hoses on my power steering system. I also need to know what type of hydraulic fluid and steering fluid it takes?? If my head gasket is bad and I put stop leak then why is it still overheating?? Where is the water going!!!
How do you replace 1995 Honda Passport head gasket?
To replace the head gasket on a 1995 Honda Passport, first, disconnect the battery and drain the engine coolant. Remove the necessary components, including the intake and exhaust manifolds, valve cover, and cylinder head bolts, to access the head gasket. Carefully lift the cylinder head off, replace the old gasket with a new one, and ensure the surfaces are clean. Reassemble everything in reverse order, torque the cylinder head bolts to the manufacturer's specifications, and refill the coolant and oil before starting the engine.
How do you replace a headlight dimmer turn signal switch on a 1995 Nissan truck?
on 95 remove plastic coverfom around steering wheel! there are about five Philip head screws, remove cover two screws holdswitch in place. be careful when unpluging wires, the whole switch is one unit.
