Very carefully drop the Transmission Fluid drain pan (it is full of fluid). Unscrew the filter and replace with the new one. Replace the gasket on the drain pan making sure you gaet all of the old gasket off; it will leak if you don't. reinstall the the drain pan. It is a good idea to drain the pan and wipe out with a lint free cloth. You will also want to clean off the magnet in the bottom of the pan as it will have metal shavings on it. If you decide to replace the fluid remember that you are only getting about 1/2 of it if you only replace what is in the pan.
To replace the transmission cooler return filter on a 1996 Dodge Ram 1500, first, ensure the vehicle is on a level surface and the engine is cool. Disconnect the negative battery cable and locate the transmission cooler return filter, typically found near the transmission. Remove the old filter by loosening the clamps and disconnecting the lines; then install the new filter, making sure the connections are secure. Finally, refill the transmission fluid if necessary and reconnect the battery cable.
It does not have a cabin filter.
You need the user manual which has steps on how you can replace a shifter knob on a 2002 Dodge RAM 1500 with standard transmission.
It is in the pan.
remove the transmission pan. then remove the filter.
how to remove and replace transmission fluid pressure switch on a 2002 dodge ram 1500
It doesn't have a cabin filter.
No, pulling the transmission is not required.
It is part of the fuel pump. You remove the tank and replace the pump.
No.
No
All you need to do is replace the sensor. It cost around $20.