All you need to do is replace the sensor. It cost around $20.
it cost 1500 dollars to replace my tranny at the local tranny shop
only one sensor on the rear axle housing just replaced mine but check engine light comes on for same thing even after electronically clearing the code and turning off engine light only takes 50 feet for it to come back on and i cant figure it out Could also be a broken wire between the abs computer and the rear axle speed sensor.
If both are the same size truck ( ie 1500 ), have the same engine, and the same drive ( 2wd or 4wd ), then it should.If both are the same size truck ( ie 1500 ), have the same engine, and the same drive ( 2wd or 4wd ), then it should.
No, not from the factory.
how to replace a fuse on a 2003 1500 ram
No, pulling the transmission is not required.
how to remove and replace transmission fluid pressure switch on a 2002 dodge ram 1500
A 1999 Dodge Ram transmission does not have an input speed sensor.
Replace the speed sensor, usually mounted on the transmission bellhousing.
You need the user manual which has steps on how you can replace a shifter knob on a 2002 Dodge RAM 1500 with standard transmission.
try the transmission ouput speed sensor
It is the two wire sensor on the lower rear driver side of the transmission.
The transmission temperature sensor on a 1996 Dodge Ram 1500 is located on the driver's side of the transmission. It is just behind the bell housing. Look for a gold plug with a black plastic top.
There is no such thing as an oxygen speed sensor.
the speed sensor.
its the code for transmission fluid pressure sensor
It is on the driver side of the transmission tail housing. It is a two wire sensor.