First of all how do you know your head is warped cracked or no good lets start at the beginning
Bit of a tricky one ... It all depends on the condition of the cylinder head. If the cylinder head is warped then replacing the head gasket won't solve your problem. A warped cylinder head can be skimmed (if not too badly warped). If the cylinder head is badly warped then it would be much easier to replace the head than fit another engine.
replace it
Your rotors are warped, replace them.
Nothing good, I can tell you that. Anything from a warped head, cracked head, warped block, cracked block, and basicly, a blown engine.
replace rotors, sounds like they are warped. if you can feel the pulsation in brake pedal they could be warped..
You have warped rotors. Have them turned at machine shop or replace them. Also replace the brake pads.
Chrysler does not list a spec, the book says replace the head if warped out of spec.
Front rotors could be warped. Replace
To fix warped cabinet doors, you can try adjusting the hinges, applying moisture to the warped area, or using a heat gun to reshape the wood. If these methods don't work, you may need to replace the door.
You can blow a head gasket or the head can crack or be warped.
To fix a warped board in your furniture, you can try using a damp cloth to moisten the warped area and then apply pressure or weight to flatten it out. You can also use a heat gun or steam to help reshape the board. If these methods don't work, you may need to replace the warped board.
Brakes, If you get on brakes and get a hard vibration and shaking like the front end is going to fall off, front rotors are more than likely warped. Stock rotors are poor quality Replace with after market heavy duty rotors.