Want this question answered?
how do you replace the water pump on Cadillac cts 2004 3.6
How do you replace the water pump on a 1988 Cadillac Seville?
how do you replace the water pump on cadillac cts 2004 3.6
sensor for water temp is in water pump on front of engine, has two wire plug going to it.
How to replace the belt
Drain coolant from radiator Remove fan shroud Remove radiator if additional room is needed Loosen fan assembly (do not remove) Remove fan belts Remove fan assembly Bolts for water pump should be accessible now Remove water inlet/outlet hoses if necessary Remove bolts from water pump Remove water pump Clean all gasket material from engine Replace gasket and water pump
To keep from breaking something, get a manual from AUTOBOOKSONLINE.COM
There are two coolant temperature sensors. One is located near the water pump and the other on the head above the starter.
You can also purchace the tool at carquest for $18.00
It is on the front of the engine. It is not a job for a backyard meahcnic.
Water pump location on a 1996 DevillWater pump is located under the thermostat on the drivers side of the engine
you must first remove muffler bearing