You can get the owners manual at this link:
http://www.poulan.com/poulanpro/viewProductDetails.do?productID=188&DealerModelID=null
I own one; the recommended line diameter is .065 inches.
Try looking on YouTube. There are a lot how to videos there.
safe lite repair safe lite replace
set it at .020 and you will be fine
If it is the same as the crown '97, remove the small top panel above the head lite under the hood. You now have access to the head lite. If just the bulb, un-screw the large plastic holder, the bulb is in there. If you have to remove the whole head lite, there is 3 small clips that hold it in. Use a screw driver to release the clips, ( might need new ones, Ford sells them for $ 7.00 each, ouch ) the head lite just pops out. If the '97 Marquis is the same as the '98 Marquis, then there are 3 small plastic wing nuts on the plastic panel over the head lites. Remove the panel and now you have access to the bulbs. If you have to remove the whole head lite, then just pull up on the sliders that hold the head lite in. Whole casing now just pops out.
raise the hood if you look behind the head lite you should see a harness twist the round part closest to the light then replace the bulb
no.
whats the sparkplug gap on a featherlite fl 25 weedeater
You need a"Pac Man" carb adjustment tool.
Go to the WeedEater website and you will find the info you want plus downloadable manuals.
Try replacing the bulb first.
you can replace it in kikos FEDEX or buy a new one