Front is easy, just replace hub
rear is pressed in
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
Remove the caliper.Remover the brake rotor.Tap the axle free from the rotor.Then unbolt the bearing assembly from the backside of the bracket.
how do i find out if i have ABS on my front wheel bearing , on my 2000 dodge Dakota quad cab 2 wheel drive
Hub and bearing assembly?
The front wheel hub assembly will probably need to be pressed out if this is the first time the bearing has been replaced. Aftermarket bearings are not as close in tolerance as the original equipment and seem much easier to replace.
It's easy, you have to replace the entire hub!When the bearings go bad, you have to replace the whole hub! Simple! It's easy, you have to replace the entire hub!When the bearings go bad, you have to replace the whole hub! Simple!
yes you can
bearing is shot
Yes
No, the entire assembly needs to be replaced.
how do i change a water pump in a 1991 dodge shadow with a 2.2 liter does it require an internal water pump
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.