Want this question answered?
The linkage bushing is located under the Crowl grill. Remove wipers and grill.
Images of the wiper linkage for a Dodge Dakota are located in the service manual. It details where the linkage connects and how to perform maintenance on it.
The neutral safety switch is located on the side of the transmission at the linkage connection. Unhook the wiring connector, Disconnect the linkage, then unbolt the switch to replace it.
That depends on exactly what linkage and joint you are referring to. Some joints can be replaced alone and some can't. You'll have to ask a more specific question.
how you change the wiper linkage bushing requires you to take off the wiper blades and vent off the top off the dak there should be about 8-9 screws maybe less, then when the vent is removed, there will be a plastic vent with plastic clips, simply lift up one edge of vent it should just pop out the do the same with other clip, when vent is lifted up unplug the rubber tubing from spray nozzle then repeat with other tube, when plastic vent is removed you should be able to see the wiper linkage crank and wiper arms there you should see the bushing simply pull the wiper linkage and remove the bushing and replace.
A 2003 Dodge Dakota does not have a cabin filter.
1. Determine if the motor is working or not. With the engine off, turn on the wipers and listen for motor running. If the wiper motor is running, the problem may be with the linkage. 2. To check linkage, remove the wiper arms from the shafts (fold arms away from windshield, move out locking tab, then take arm off the splined shaft by rocking or gently prying). Then remove the cowling by taking out 7 Phillips head sheet metal screws. Look at the linkage to see if it might be broken or if the linkage has come off the plastic bushing on the wiper motor. (this is what I discovered today on my 1990 Dakota and now I need to find just the plastic bushing. 3. If the motor is not running, first check the fuse. Replace fuse if it is blown. If not, the motor most likely needs replaced.
What all is involved in replacing a a/c evaporator in a '94 Dodge Dakota?
Have you ever had the linkage adjusted? 90% chance this is the problem.
How do you replace a transmission solenoid on a 2001 dodge Dakota 4.7 engine 4x4 location?
It is on the throttle body, Opposite of where the cables hook on the throttle linkage.
Check the fluid level. Check the linkage. Check all computers for trouble codes.