Want this question answered?
To replace the exterior mirror on a 1996 Beretta, find a small plate on the inside of your door. Remove the screws and install the new mirror.
First, take off the inside door panel.You should see how the mirror mounts on the door. From the inside of the panel, there are 3 nuts to take off to replace the mirror. When the mirror is replaced, put back the inside panel.
i need to replace both side mirror on my SUV send my answer.
You can replace a rearview mirror, on your 1996 Infiniti, by removing the old mirror with a scraper. Apply the glue to the cleaned surface. Hold the new mirror in place until the glue dries.
On the 1996 Hombre, you have to remove the inside door panel. You will see three nuts holding the mirror. Try Advance Auto Parts for replacement mirror (probably same as S-10).
You first need to remove the triangle shaped trim piece inside the door opposite the mirror. It just pries out with a screwdriver. Then disconnect the electrical connections if a powered mirror. Undo the 3 bolts holding it and then remove the mirror. -RC-
To replace the mirror on the drivers side of a 1996 Chrysler Cirrus acquire a direct replacement with the sail mount. This mirror is heated, non folding and is installed with a Philips head screwdriver.
belt diagram for a 1996 Geo Prizm
The bulb and harness twist off the back of the lens. The lens is a separate unit.
where is located the fuel pump relay on 1996 geo prizm
There should be a small plate on the inside of your door... right where the bolts to the mirror are... you gently pull that off and there are 3 screws there. take them out and the mirror should come right out... install the new one in the same spot and just ut the late back on.
How to remove left inner door panel of a Pontiac Bonneville 1996