You start by unplugging the electrical connector. You then use a 7/8 inch wrench or oxygen sensor socket to turn counter clockwise until removed. Reverse steps to install.
You start by unplugging the electrical connector. You then use a 7/8 inch wrench or oxygen sensor socket to turn counter clockwise until removed. Reverse steps to install.
You can not successfully clean an oxygen sensor. You need to replace it.
replace 1987 dodge pickup/power window motor
There is a problem with the downstream oxygen sensor. I would replace it.
It resides just past the catalytic converter. Underneath the truck about where the passenger would sit.
A 1997 Dodge with a Cummins diesel does not have an oxygen sensor.A 1997 Dodge with a Cummins diesel does not have an oxygen sensor.
To replace the oxygen sensor on a Dodge Magnum 3.5L, first, ensure the engine is cool and disconnect the negative battery cable. Locate the oxygen sensor, which is typically found on the exhaust manifold or downstream in the exhaust system. Use an oxygen sensor socket or a wrench to unscrew the old sensor, then install the new sensor by threading it in and tightening it securely. Finally, reconnect the battery and check for any error codes before starting the engine.
A 2000 Dodge Ram diesel does not have an oxygen sensor.
The 2004 Dodge Intrepid oxygen sensor can be found on the back of the air cleaner housing. Remove the wiring harness. Remove the oxygen sensor retaining screws. Reverse the process to install the new oxygen sensor.
It doesn't have an oxygen sensor.
where is the crankshaft sensor on a 1994 dodge pickup with a 5.9l engine?
It measures the speed of a part.
The oxygen sensor is screwed into the exhaust, behind the engine.