Control arm and ball joint are all one unit.
YOU HAVE TO REMOVE THE TIRE AND REMOVE THE SPINDAL IF IT IS A LOWER BALL JOINT THEN YOU HAVE TO PRESS IT OUT AND PRESS IT BACK IN WITH A BALL JOINT PRESS IF IT IS AN UPPER BALL JOINT THEN YOU HAVE TO REPLACE THE UPPER CONTOL ARM AND HAVE THE VEHICLE ALIGNED
replace lower ball joint on ford ranger 2001
with tools and a jack
how do u replace the lower ball joint on a 1997 ford mustang
You need to have a "Ball joint press".
It will cost approximately $300 to replace the ball joint on your 1999 Ford Taurus. The ball joint will cost approximately $40 and require three hours of labor.
you will probably need a ball joint press and a splitter
The CV joints on a 1995 Ford Taurus can be replaced by removing the front tires, and the nuts on the lower ball joint. Next, the lower ball joint will need to be removed and the CV joint can be removed.
pay someone else to do it
I believe you can change just the ball joint on the lower control arms , the upper ball joints come with a new control arm
You will need to take off the old part and then replace it with the new. You can do this on your own or with the help of a mechanic.
Remove the tire and wheel. Remove the ball joint retaining nut. Pound the ball joint out with a hammer. Reverse the process to install the new ball joint.
For the lower ones you need a ball joint press from Autozone. They have those on their loan-a-tool. The upper one's come on an arm and you just replace the arms.
Jack the car out and remove the wheel. Remove the ball joint nut. Pound the ball joint out with a sledgehammer. Reverse the process to install the new ball joint
The ball joints on a 97 Ford Thunderbird are replaced by placing the vehicle on jack stands, removing front wheel and rotor, and unbolting the steering knuckle. A ball joint puller is then used to remove the ball joint and a special installer tool is used to press the new one into place.
no you just replace them
Remove the tire and wheel. Remove the brake assembly and rotor. Remove the retaining nut from the ball joint. Pound the ball joint out with a hammer. Reverse the process to install the new ball joint.
You will need to remove the tire and wheel from your Oldsmobile. Remove the retaining not on top of the ball joint. Pound the ball joint out. Reverse the process to install your new lower ball joint.
With a ball joint press and removal tool.
Remove the tire and wheel. Remove the nut from the top of the ball joint. Pound the ball joint out with a hammer or mallet. Reverse the process to install the new ball joint.
price on replaceing ball joint 1993 cutlass supreme
Replacing a ball joint on a Ford 250 requires removing the wheels, brake assembly, as well as the spindle. From there, the ball joints can be removed and replaced.
Remove the tire and wheel from your 1993 Mercury Cougar. Remove the ball joint retaining nut. Pound the ball joint out with a hammer. Reverse the process to install your new ball joint.
You can not just change the ball joint , you have to replace the whole lower control arm with ball joint.