Open your trunk and go to whatever side needs replacing and there will be a black round cap, about the size of a quarter maybe bigger. Unscrew that and you should be able to pull back the carpet right behind the rear lights, if you cant get the carpet the long black plastic strip with 4 to 5 black plastic caps like the other one where your truck latches, pop 1 or 2 of those out right/left pending what side your working on you should be able to pull carpet back, when you get it right behind the light in the trunk you will find 2 nuts that are screwed onto a bolt, you can only see the threads of the bolt not the head, the bolts are about 1" maybe 1 1/4" long. Unscrew both of those and the whole brake light casing and cover should slide right out the back, so pull the light towards you. Look in your owners manual to determine which light is the brake light, there's two lights, one is the brake light and the other one is the parking lamp, turn light bulb socket which ever way it needs to turn to come out the back of light casing, pull, light out of socket and install new light, reverse procedure to install everything back.
There are actually 5 screws that are part of the lens assembly that stick through the body fastened by nuts on the inside. Use a 7/16 long socket with a stubby ratchet. When reattaching the lens assembly be careful not to over-tighten nuts to avoid breaking the assembly. Since you've gone to all this trouble,replace all the bulbs, not just the burned out one.
Some are accessable from the trunk. If not, take the light assy off.
remove the trunk lining or bend it back easy where the brake light is to access it and change it out.
Where is abs fuse at
3157 - See sources and related links for picture, specifications and 1999 Lincoln Continental full light bulb list.
You have to remove the trunk liner from the rear of the car,and then remove the three bolts that hold the taillight into place.
its a speed sensor. about 95$ plus labor
Check on the upper end of brake pedal (under dash)
the keypad on the door is no good. either replace it or disconect it
Save yourself some grief and take it to a repair shop
A problem has been detected with the Anti-lock Brake System It could be a fuse , a sensor , or some other problem As long as the red " BRAKE " light in your dash is not on you still have " normal " brakes
To replace the brake light on a 2000 Ford Explorer, remove the screws holding the brake light in place. Gently, but firmly, pull the brake light out of the vehicle and replace with a new one.
How to replace a brake light on a nissan Tiida hatch back.