Want this question answered?
How to replace front brake pads on Mercedes s430
Beind brake drum to replace
Its been awhile since I've done them. (i have a 2000 s 500) but if you have any knowledge on how to change brakes you won't have any problem. these are probably the easiest pads i have ever replaced.
Try taking the battery cable loose. That works for a lot of cars. I've never had any experience with a mercedes. To reset you brake light or any warning on the S430, just hold down the button (a lil black button on the right side on you instrument cluster) and that will do it. The Brake Sensor warning light will reset itself once the vehicle is restarted. Most common problems are 1. You have a bad sensor or 2. You did not replace the brake the sensors were triggering. There are 3 sensors on the S430 One on each front wheel and 1 on the Right Rear Wheel.
most likely you have bad brake light svitch
how do you replace standing light bulb in the s430
easy but you need good pin punch to knock out pins. you may need to use very fine flame acetylene on these pins they will come out and best replace them with new ones you dont need to take off calipers only wear indicator unit with 1 6mm bolt
The bolt pattern from the S430 is 5x112
Where is the fuse for the driver's door on a Mercedes s430
about 300
2000-2006 Mercedes S500 S430 S600 Clean are Cabin filter ( air coming in from outside) are behind the glove box, Remove 6 screws and the glove box will slide out, you can then remove the black cab with a white color latch and remove the filter. I"m still trying to figure out how to replace charcoal carbon filters which are installed on the heater core.
I don’t understand the question