Send it back to Sony. This job is way too complex for most people to do themselves. Go to www.sony.com
camera 200w. how much pixels in there?
In ten hours, a 200W bulb will use: 10 * 200 = 2000 Watt-hours = 2 kwh
the maps on 250w include all North America's vs 200w only the 48 states, Hawaii and Puerto Rico OR regional maps (if it's not bought in the US)
The Sony - 200W 2-Ch. Audio Receiver has a 1/4-inch headphone jack that allows you to plug headphones into it. anonymous@oola.com
It sounds like it is time to have the internal battery replaced. This can be done by Garmin, or if you are handy, check the web for instructions on how to open the unit and replace the battery. If the unit is still under warranty, Garmin may not charge you for the replacement.
You never can tell. The max rating is undefined and just means that in some circumstance you could feed 200W into the speaker (or get 200W out from the amplifier) for some undetermined length of time (like a few milliseconds or even micro seconds) which is pretty meaningless.
No. The heat from the larger bulb will damage the socket, and is a fire hazard.
both will be fused.
The error message "No detailed maps found" on your Garmin Nuvi 200w suggests that the detailed maps needed for navigation are either missing or corrupted. You may need to update or reinstall the map data using Garmin's software or contact their customer support for further assistance. Ensure that your Garmin device is properly connected to your computer during the update process.
Yes. Just don't turn it up too loud.
It mean 4 channels at 50w each for a total of 200w. This amp would drive your component speakers just fine. You will want a much larger amp for subs.
3300 lumens is considered fairly bright, suitable for lighting up a medium-sized room or outdoor area. It is equivalent to the brightness of a traditional 200W incandescent light bulb.