You must pull off the rear interior panel and manually release the mechanism. It can be difficult and cumbersome. Be certain to not break the plastic!
Replace any broken parts or adjust latch assembly
Pull the latch.
Happened to me a few months ago. Remove the inside rear panel and pull the latch manually. Then you can unscrew the broken latch and replace it.
You remove it from the door and find exactly which part is broken,replace that part.
Usually you can use a flat bladed screwdriver in the hole the handle went in and turn the latch.
on the latch there are two small bolts loosen them and move the latch up then retighten
2001 nissan how do you remove the nissan emblem to access replace broken handle
use a pry bar and replace hood after you break it
I have an 89 that occasionally gets stuck in the down position.Use a screwdriver or a butter knife or a pen.Poke down on the bottom half of the latch (not the top part on the hatchback above your head).
where your latch is broken at you can use a pair of pliers and pull the exposed cable wire and it should open best thing when u open it replace the cable wire
dodge truck broken hood latch
If the door latch on a 1999 Chevrolet Blazer is broken on the car frame, a new latch might have to be welded in. The old door latch will have to be cut out with a torch. If the latch is broken on the door, a new door might be cheaper than welding in a new latch.