Want this question answered?
I think it is under your center console.
Answer 2002 Neon, 6 screws. Unscrew 1 ea. screw from each cupholder. Open center cosole and unscrew remaining 4 screws. Emergency brake ALL the way up. Lifting from the rear and pushing forward lift out the center console.
replace it, it should just pop out of the console
Neon Striker invented the neon light bulb in 1837.
Reach underneath the front of the car, twist the assembly counter clockwise (about 1/4 turn). The bulb and the wires will dangle attached to each other. Disconnect the wire from the bulb and replace the bulb. Reconnect the wiring harness and bulb to the car.
Take it to the dealer ! I have a 2003 Neon and had the same problem. So looked uner the front end and discovered a splash guard.After removing this splash guard there was relatively enough space to remove the old bulb and replace it with a new one. Caution, when installing the new bulb, wear protective hand covering as direct skin contactto the new bulb will damage the new bullb. Replace the splash guard and you're done
First you have to take out the blinker/parking light to get to the fog light, each fog light has 4 screws around it (don't touch the one on the side that's gold) undue the 4 screws and pop it out, then you have the bulb exposed and you can replace it.
Tugsten No, its Neon. like Neon signs actually its not neon because neon is used for neon lights the questions states what is used in light bulb filaments not neon lights.
Tugsten No, its Neon. like Neon signs actually its not neon because neon is used for neon lights the questions states what is used in light bulb filaments not neon lights.
Its as simple as changing a light bulb... righty tighty, lefty loosy
I have a 1997 Plymouth Neon. The way to replace the headlight bulb is: 1. open hood, and disconnect the wiring connector from the headlight bulb socket. 2. Turn the bulb socket retaining ring counterclockwise and remove the bulb and socket assembly. 3. Pull the bulb out of the socket assembly. 4. Reinstall the bulb and socket assembly in the light housing. Turn the retaining ring clockwise to secure the bulb in the housing.
The light that is advertised to get the best energy efficiency is the neon light bulb. The best thing to do is to replace your lights with these in your home.