Remove 2 caliper bolts, squeeze piston back,remove old and fit new pads. Wirebrush slider then re-fit caliper.
To replace the caliper on a 1997 Oldsmobile Achieva, first, safely lift the vehicle and remove the wheel. Then, unbolt the caliper from its bracket, disconnect the brake line, and remove the old caliper. Install the new caliper by attaching it to the bracket, reconnecting the brake line, and ensuring all connections are tight. Finally, bleed the brake system to remove any air, reattach the wheel, and lower the vehicle.
Alero
no.
1997 olds achieva remove starter and wire plug got pulled out and we cant find where it goes? help?
You buy tools and install it!
To replace most heater cores you have to remove the dash on the passenger side.
you need to replace your heater core.
To change the brakes on a 1998 Oldsmobile Achieva, first, lift the vehicle and remove the wheel to access the brake assembly. Next, remove the caliper by unbolting it and slide it off the brake rotor; support it to avoid stress on the brake line. Take out the old brake pads and replace them with new ones, ensuring they are properly seated. Finally, reattach the caliper, reinstall the wheel, and lower the vehicle before testing the brakes.
To change the rear brakes on a 1996 Oldsmobile Achieva, start by safely lifting the vehicle and removing the rear wheels. Next, remove the brake caliper by unbolting it, then slide it off the brake rotor. Replace the brake pads by removing the old ones and installing the new ones, ensuring to compress the caliper piston if necessary. Finally, reassemble everything by reinstalling the caliper, wheel, and lowering the car. Make sure to pump the brake pedal before driving to ensure proper brake function.
I get about 30 miles to the gallon with my olds achieva.
1992 olds Achieva does not have that switch. ECM receive signal from the coolant temperature sensor and send command to relay #6 for turn on/off the radiator fan. Relay #6 is located in the motor compartment on the fireboard.
Leak in heater core.