WOW that's A rare bird, But trust me, If you can find the bearings for that 1/2bbl. carb. you can install them, Those arent Zirks, they just look like it, they are actually bleader valves. Be sure to set the ignition timing at 360 degree. before TDC. After servicing, Good luck, Jamie.
how long does it take to replace a carburetor on a chevy truck?
If it had a carburetor , it wouldn't be hard to replace - it's fuel injected
how to replace wheel bearings on 2004 GMC envoy?
how do you replace rear wheel bearings on nissan pulsar
Dirty or clogged carburetor. Or air leak in fuel line at fittings and connections. Either way a lack of fuel to the cylinders. Weak fuel pump. Clean or rebuild your carbs. Check or replace fuel line. Replace fuel pump.
This depends on what bearings in what make model year and engine of car.
It would be recommended to replace the rear axle bearings and axles when they are worn/bad. If the bearings and axles are okay, just replace the seals.
Usually the runners can be carefully removed using a thin screwdriver and the bearings should drop out. Replace the bearings and replace the runner by using a 30mm socket or press if you have one.
Wheel bearings? 4X4 ? 4X2?
There is no reason you would have to.
There are no replaceable camshaft bearings. You will need to replace the head or heads.
How do you replace the front wheel bearings on a nissan frontier 4x4 1999