Make sure you disconnect the power from your battery to prevent you from shocking yourself and accidentally touching the speaker wires on something and blowing and other components of your sound system or blowing any fuses.......Once you have done that simply pop the little screen out with a flat head screw driver and unscrew the screws holding down the speaker.....hope this helps
Pull the inside door panels off and you will see there bolted in the door.
It is one of the easiest cars ever. Just gently squeeze off the metal grill in the door. It pops right off without tools. Then you will need a socket set to unbolt the speaker.
Pay someone else to do it!
The door speakers are 5.25 inches but you have to purchase an insert in order to replace the door speakers.
6x9s
6 3x4
The front door speakers on a 2000 Pontiac Grand Am Se are 4x6. The rear deck speakers are 6x9.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
I had to replace the ones in my 1997 Sebring. Using a tool such as a flat head screwdriver detach the plastic cover that is over the door speaker. Remove the screws that are holding the speaker to the door. Pull the speaker out enough to detach the plastic clip that connects the wiring to the speaker. Installing the door speaker is the reverse of removing the speakers.
Remove the door panels and replace the speakers. They sit in baskets and are simple to replace. We have instructions at our enthusiasts forum. www.trailvoy.com
The 1997 Chrysler Concorde door speakers size is three inches by five inches. The rear speakers measure four inches by six inches.
6" speakers in a 2000 Toyota camery