Want this question answered?
The headlight has two filaments. One for the high beam and one for the low beam. The most likely reason the high beam is out is because the high beam filament is broken. Replace the bulb and it should fix it.
There may be a poor connection or a burned out fuse for the driver's side headlight. There may be a poor connection or a burned out fuse for the driver's side headlight.
call car talk look it up on google.
To replace the lights in your car you need to unscrew the headlight cover on your Buick. Once this is removed you can unscrew and replace the old bulb.
replace passenger side low beam headlight
Passenger side or driver side? BClear. The low beam is built into the same bulb as the high beam. Just pull the bulb out from behind the housing under the hood and replace it. If the low beam doesnt work you have to replace the whole bulb. They're not very expensive.
replace the high beam bulb
To replace a Fiat Stilo driver side headlight , you need to first remove the battery cover and turn the steering wheel to the right. After this you should remove the wheel arch and then the cap that is on the headlamp back. This will make the bulbs visible. You can then proceed to replace the headlight.
Look at the headlight on the driver's side. Between the battery and the headlight on the right-most side of the engine compartment, along the top of the frame where the hood rests, you'll see a long, metal, L-SHAPED pin. Pull that pin straight up and it will release the headlight. Lift out the headlight, and twist out the bulb from the back. Same process for the passenger's side, but its easier to explain using the driver's side as the example.
If you haven't already, replace the headlight. Chris
It could be a bad headlight bulb , or fuse # 4 is a 10 amp fuse for the drivers side low beam portion of the headlight
please show diagram how and where the driving side headlight to replace? bulb.#9007 please show diagram how and where the driving side headlight to replace? bulb.#9007