replace the high beam bulb
Only high beams work on my 93 Nissan maxima. Had new headlight put in but still doesn't work. What may this be? Thanks you so much
adjust headlight beam on 2010 xtrail
There isn't one. The low beam of the headlight will burn out if it is not working.
The Low Beam AND High Beam are in the same bulb. The procedure to change it will be in the owners manual.
The 1994 Chevrolet S10 has different headlight configurations. See related link below for variations. If sealed beam bulbs; H4666. If halogen; 9006 low-beam & 9005 high-beam.
Check the bulb and voltage coming out of the socket. If there is no voltage then the jumper wire may be bad. Just run a new wire from the working headlight to the non working headlight.
is there fuses for high and low headlamp beam on almera
Check the bulb Check to see if you are getting power to the socket
hey, you kick it but not to hard that you break it
If I'm not mistaken you should have sealed beam headlights as mine does. If you are getting water into a sealed beam headlight you will have to replace the lamp. The old one is no longer sealed.
It will depend on if you need high beam or low beam. See sources and related links for lamp part numbers and options.
most likely it is a fuse