Want this question answered?
The 2006 Honda Civic coolant temperature sensor is located on the front of the engine. The coolant temperature sensor will be in the vicinity of the thermostat housing.
How can I check the ENGINE COOLANT TEMPERATURE (ECT) sensor on my 1991 HONDA PRELUDE SI 2.1L
The engine coolant on a 1991 Honda Civic is replaced by turning the drain petcock and releasing the coolant. The filler cap is then removed and coolant added until the system is full again.
The 1988 Honda Accord coolant temperature sensor can be found on the front of the engine. The coolant temperature sensor will be a few inches above the thermostat housing.
A = Replace engine oil1 = Rotate Tires3 = Replace Transmission Fluid5 = Replace Engine Coolant
A = Replace engine oil 1 = Rotate Tires 3 = Replace Transmission Fluid 5 = Replace Engine Coolant
preludepower.com take visit there you will be among friends
(based on a 96 civic LX) I believe the engine coolant temperature sensor is located on the side of the engine (opposite of the camshaft). If you need more details, I would recommend you to download the service manual on www.manualnguide.com
Follow the lower radiator hose from the radiator to the back of the engine. Where it connects to the engine, you will see wires plugged in to the sensor
A = Replace engine oil1 = Rotate tires and check air pressure 5 = Replace engine coolant and replace thermostat
The knock sensor for a 3.5 Honda engine is located on top of the motor under the intake. It is about a 1.5 hour job to replace it.
The coolant temperature sensor on a 1998 Honda Accord is located next to the thermostat housing. The sensor has a blue clip located on the right side of the engine compartment.